Home > Hard Drive > Switch Slave Drive To Master

Switch Slave Drive To Master


On the back of the drive, next to the ribbon cable will be a small plastic connector. Depending on your computer model it will be either "Delete," or "F2." Press it a few times before your Operating System (Windows, etc.) starts up. Choose the restart option. Wonder what connects to where on the cable? his comment is here

At the application level, SATA devices can be specified to look and act like PATA devices.[29] Many motherboards offer a "legacy mode" option, which makes SATA drives appear to the OS One is a small blue cable with a black connector and the other is white has five wires leading to it. Limit Capacity Option - This option may be required if the system the drive is being installing into does not support the full capacity of the drive. Flag as...

Master Slave Hard Drive Setup

It is a difference in the way the OS and the manufacturers measure drive size. We explain everything you need to know. Volume label is nothing other than the name you want it to be called.

  • Usually, the BIOS will attempt to boot from each drive in order, which means you can set your DVD drive to first and the hard drive on which Windows is installed
  • Windows 10 Redstone 2 14894 Build Update Tutorial with ISO. 2016-08-01 17:18:23 Tracy King - Windows 10 Restone 2 14894 ISO is ready to be downloaded and installed for you.
  • This is easy on most motherboards.

Normally it's red on the grey cables and white on black cables etc there will be some kind of colored line to indicate pin 1. If this new drive is going to be your main drive then use the partition application that is built into Windows. Flag Permalink This was helpful (0) Collapse - Jumpers. . . Sata Hard Drive Slave Jumper Setting Jul 5, 2007 SATA drives ...

Yes No Not Helpful 0 Helpful 1 Unanswered Questions My IDE hard disk is locked, how to unlock without my password? Master Slave Hard Drive Jumper Settings Flag Permalink This was helpful (0) Collapse - The maker and model numbers ... So as technology advances, Cable Select as a concept may still catch on. Simply turn on your PC, press the Del key a few times (or look for a message telling which key to press to enter Setup) and the BIOS should appear.

Privacy Policy | License | Terms & Conditions | Uninstall | Resource | Data Recovery Solution | iPhone Recovery | Android Recovery How To Install A Second Sata Hard Drive In Windows 7 Sign in to make your opinion count. About Press Copyright Creators Advertise Developers +YouTube Terms Privacy Policy & Safety Send feedback Test new features Loading... If you want to do that you'll just have to make sure that it's plugged into the right part of the cable.

Master Slave Hard Drive Jumper Settings

Partitioning the drive in Windows If you install a new drive and want to use it in Windows, you must partition the hard drive first! Already have an account? Master Slave Hard Drive Setup There has to be another way. What Is A Slave Hard Drive After the drive is secured then go ahead and connect the power and IDE cables.

Speed work informática 52,101 views 15:10 Install a Second IDE Hard Drive - Duration: 9:41. this content Certainly, retail packaged hard drives will have an install disk for you. Look on the bottom right and you'll see something that looks like this picture. The Master drive goes on the black connector at the end of the cable, the slave drive connects to the gray connector in the middle and the host adapter connects to How To Slave A Sata Hard Drive

This post has been flagged and will be reviewed by our staff. Now comes the confusing part.With cable select, you first needed a special 40 conductor IDE cable that would determine master/slave connections. Most modern CD drives are ATA33 while the modern hard drives are ATA133. http://fmcproducts.net/hard-drive/system-not-seeing-primary-slave-drive.php Your system will repeat the same process for the second drive, but making this one the Slave Drive. 6 Press the "F10" key to save the changes.

If you want to make it the master or the slave, you will have to look around the drive to find where the instructions are. Difference Between Master And Slave Drive Flag as duplicate Thanks! Fast Wordpress Tips Parents Guide to MySpace Tribute to Adrian ColeVictim of Child Abuse

Recommended Software for PC Hell Visitors Malwarebytes Anti-Malware iolo System Mechanic® Emsisoft Anti Malware Return to

It was the fourth time that she said, "The thing is, if you ..." that I said "You're not listening to me," and hung up.Anyone else got an idea?

Troubleshooting No hard drives show up: Do you have two drives on the cable? Answer this question Flag as... Depending on your computer model it will be either "Delete," or "F2." Press it a few times before your Operating System (Windows, etc.) starts up. How To Slave A Hard Drive To Recover Data Setting the Jumpers Master or Single Drive - Use this setting if the drive is the only drive on the ATA interface cable.

Sign in to make your opinion count. Can some one help me turning hard drive master and slave. Or, go into your start menu, then press the on/off/shut down or similar symbols. check over here Transcript The interactive transcript could not be loaded.

Close Yeah, keep it Undo Close This video is unavailable. Cable-Select Option (Default) - Use with Ultra ATA cables. If you do it right, the BIOS setup screen appears. 2 If prompted for a password, enter it and press the "Enter" key. 3 Navigate to the "CMOS Setup" and press Initiate changes.

Cloves 125,326 views 2:19 How Jumper Settings on a IDE Hard Drive Work (SETUP PROCESS INCLUDED) - Duration: 9:13. Follow this Windows 10 Redstone 2 14894 … How to Update Windows 10 to Threshold 2 with Backups?. 2015-12-01 14:57:14 Tracy King - Here in this passage you’ll find detail steps To connect the IDE cable to the motherboard you'll have to find something that looks like this: Each connector represents 1 IDE channel. Try checking the jumper setting on the HDD's.

Attach the wrist strap to the metal chassis of your computer. EditRelated wikiHows How to Update Your Computer's BIOS How to Identify the Motherboard How to Find and Update Drivers How to Ground Yourself to Avoid Destroying a Computer with Electrostatic Discharge It's wise to check your motherboard manual and connect a new drive to a matching SATA port (one running at the same speed as your drive). Ask a Question See Latest Posts TechSpot Forums are dedicated to computer enthusiasts and power users.

Uploaded on Sep 28, 2008Change the master/slave designation on a hard drive by using the cable select mode to modify the jumper settings.