Home > Windows 7 > System Hangs When Trying To Access My Scsi Boot Drive

System Hangs When Trying To Access My Scsi Boot Drive

Contents

Because of SATA's less than optimal handling of nonresponsive drives, this can mean that not only the drive you are copying from is going to have its I/O delayed. I didn't really worry about it too much what it came up as in the bios as long as it worked at the time. Ghana scam and direct deposit scam? Preview post Submit post Cancel post You are reporting the following post: Hard Drive In Freezer question This post has been flagged and will be reviewed by our staff. check over here

The MB manufacturer list of BIOS updates will describe any changes that have been made to the latest version. Any USB, CD or other device can be used, even floppy disks. Boot from a floppy attach to a network drive or have a secondary drive installed and if you can access the data copy it off to there.6. It sounds like you have a corrupt boot disk or a disk-controller problem. hop over to this website

Hard Drive Freezes Computer When Connected

If you would like to refer to this comment somewhere else in this project, copy and paste the following link: Dannl - 2011-01-25 I got it to work on my Dell Click here: Repair Your PC and Access Your Data with [email protected] Boot Disk [email protected] Boot Disk provides an easy and reliable solution for accessing data and repairing your computer in the Good idea though - will use it as a last resort. Don't risk your data/system if your MB is not up to the task.

  • Flag Permalink Reply This was helpful (0) Collapse - Another success story was...
  • Any suggestions?
  • I wanted to swop it with a IDE HDD since I know that the BIOS recognises the two IDE channels no problem.
  • Also just because the disk is damaged doesn't mean the controller isn't, especially if an electrical fault damaged the disk. –Chris H Aug 10 '15 at 9:02 The accepted
  • Even when I am in the bios with the two connected.

Specifically designed to run the system in an emergency situation, Windows 7 boot disk - Active @ Boot Disk has a lightweight Windows version capable of running off CD/DVD or USB Sometimes, it helps to remove the PC board from the drive and reinstall it. (Connector problem again.)6. This problem usually shows up on older disks that have been running a few years (usually 24 hours a day) and then shut down for service or other reasons.? Windows 10 Freezes At Startup The data was backed up to a portable tape drive and the C drive was replaced and restored.From: Sam EspanaI have used several ways to solve the same issue.

There was no startup disk made by this machine.Reviving a drive like that one?even if only long enough to copy its data before you throw the drive in the garbage?is a Do I choose the MBR or the GPT option? Your software looks like it can rebuild the MBR but I can't get your software to open any drives even the known good ones in and attached to the computer. http://superuser.com/questions/954262/why-do-damaged-hard-drives-freeze-the-entire-system If the drive is not in an enclosure (external hard drive) then your best bet is going to be to call a data recovery company like DTI Data Recovery.

Hope this helps! Windows 7 Hangs After Login But if you have any other suggestions for this, I'm wide open! Hope they work for you. It might also be they are having issues with the USB 3.0 portion depending on the age of the device.

Windows 7 Hangs On Startup Welcome

Tech Support Guy is completely free -- paid for by advertisers and donations. https://ubuntuforums.org/archive/index.php/t-1054871.html blazemoreJanuary 30th, 2009, 11:34 AMIf you can, do it from a floppy, not from within Windows. 73ckn797January 30th, 2009, 11:41 AMHi ! Hard Drive Freezes Computer When Connected There only seen to be 2 sata connections on the mobo from what I can see. How To Revive A Hard Drive Now, depending on how this QR was put together, you may have to change to a virtual ?drive?possibly N: and then the TOOLS directory.

My IDE drive started to die on me, so I bought another 500gb SATA drive and installed it. check my blog Everything is clean as a whistle. But the drive doesn't appear under My Computer. In regards to flashing the BIOS. Windows 7 Hangs On Startup Black Screen

Thanks for your time BigmonJanuary 30th, 2009, 05:02 PMCheers. All submitted content is subject to our Terms of Use. I have a samsung spinpoint hm121h1 sata hdd, and it placed in a enclosure. this content dBforumsoffers community insight on everything from ASP to Oracle, and get the latest news from Data Center Knowledge.

Is your drive SATA-I or SATA-II? Windows 7 Hangs On Starting Windows Back again. Generally, I get phone calls where the customer states that the computer is no longer seeing their hard drive.

We were able to bring back a failed drive in an older HP server running NetWare 4.11.

Since swap is sometimes used even when the system is not under memory pressure, and load-on-demand executable code is common on modern systems and with modern executable file formats, unintended disk Windows IT Pro Guest Blogs Veeam All Sponsored Blogs Advertisement Join the Conversation Get answers to questions, share tips, and engage with the IT professional community at myITforum. Fortunately he was able to exchange it for a Seagate Barracuda. Computer Freezes After Startup Windows 7 I have a program that I was hoping could read it - HFSExplorer.

Thanks Bill Morris September 24, 2013 10:14 pm Reply # The drive is a iOmega Home Media Network Hard Drive (external). It is showing in my computer and in disk management. by R. have a peek at these guys If any of these attempts to revive the drive has succeeded, then immediately bring the system up and back up any important files to another drive or to removable media.

Jacqui Best October 16, 2013 3:54 pm Reply # Anonymous, Did you slave it via IDE, SATA, or USB? It could also be a virus, and a program like F-prot will look at the drive as a physical unit. New MB's are cheap. Thanks again If you would like to refer to this comment somewhere else in this project, copy and paste the following link: Gordo - 2010-11-12 For those looking for specific directions,

There make any changes relating to hard drive configurations such as whether it is a raid setup, SATA, IDE or whatever other options are available. I yanked the HD from the box and put it into a working XP machine and showed the same stuff in "Explorer"; however, it shows the correct info in Disk Manager If the drive is IDE or ESDI:a) Verify that the controller is functional in a different computer, if possible.b) If the drive is bigger than 1024 cylinders, make sure you're using What are the differences between Trump's old travel ban and the new one?

Usually parts with a "Lite" designation have older chipsets, etc. Place this into a freezer turned to as low as possible for 24 hours. I shut down, checked and made sure nothing came loose.. Twenty years experience tells me the drive is readable but needs to be low leveled or (safer) replaced BUT I'd like the date on it if I can get it.

Does the second drive show up in the boot-up summary screen? What can I do? I have used them to good effect. So please suggest me any solution.

Does this mean my drives are done? Use a disk utility to read the specs off of the drive.4. Place the drive in a freezer for about 10 minutes.3.